Connecting To The Internet
Sensor Setup
Follow the manufacturer’s manual to configure your Airsquitter:
Important: only use the ethernet method to setup your Jetvision. Do not use the micro-USB as this does not work. Tip: If you plan to use wi-fi to connect your device, use ethernet to configure your wi-fi network first, then move your device closer to your antennas, and complete setup.
Key steps:
Plug the Airsquitter sensor into your router via ethernet cable
Power the sensor with the supplied power cable
Click the black button on the front of the sensor until you see an IP address on the small LED screen (it should look something like 192.168.1.xxx)
Type this into a browser window on another device (e.g. phone or laptop) that is connected to the same router
You should arrive at the home screen of your Airsquitter
Go into network settings to configure your wi-fi with the network name, and password
You should be connected to the internet
If you are having any issues, please see our troubleshooting guide here, or open a ticket on our Discord channel, and a member of our team will be in touch as soon as possible to help you.
Last updated